欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
线列红外焦平面读出电路在正常工作时需要提供多路数字脉冲和多路直流偏置电压。本文基于0.5μm CMOS工艺设计了一款驱动电路芯片,为电容负反馈放大型（CTIA）读出电路（ROIC）提供驱动信号。电路芯片采用带隙基准电路产生低噪声低温漂的直流偏置电压,采用数字逻辑电路生成CLK1,CLK2,RESET等八路数字脉冲。仿真及测试结果表明：驱动电路芯片输出的数字脉冲及偏置电压符合设计值,可驱动CTIA型线列红外焦平面读出电路稳定工作。
英文摘要：
Readout integrated circuit （ROIC） of linear infrared focal plane array （FPA） with capacitive trans-imped- ance amplifier （CTIA） should be applied with clock pulses and DC bias voltage. In this paper, a method of designing clock pulses and DC voltage for linear infrared FPA CTIA ROIC is presented. The DC voltage （ about 2.6 V） is generated by bandgap reference circuit, and the eight clock pulses （ CLK1, CLK2, RESET, SH1 N, SH1 P, SH2N, SH2P and ST） are generated by a digital logic circuit with two input signals （CLK and LSYNC）. Simulation and test results show that this driving circuit can drive FPA steadily.
同期刊论文项目
同项目期刊论文
Suppression of extension of the photo-sensitive area for a planar-type front-illuminated InGaAs dete
Influence of thermal annealing duration of buffer layer on the crystalline quality of In0.82Ga0.18As
Effect of buffer layer thickness and epilayer growth temperature on crystalline quality of InAs0.9Sb
Effect of buffer growth temperature on crystalline quality and optical property of In0.82Ga0.18As/In
Effect of sulfur passivation on the InP surface prior to plasma-enhanced chemical vapor deposition o
Selective wet etching of Al0.7Ga0.3As layer in concentrated HCl solution for peeling off GaAs microt
Investigation on growth related aspects of catalyst-free InP nanowires grown by metal organic chemic
期刊信息
位置：