欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
基于超分子原理，研制了用于油基钻井液的提切剂CFZTQ-1，以此为核心开发了新型高密度无黏土油基钻井液体系，并对其进行了性能评价和现场应用。研究表明CFZTQ-1在水相中缔合形成的超分子结构显著增加了反相乳液的弹性，提切效果与助悬浮性能均优于国外几种同类提切剂，且CFZTQ-1与有机土之间存在协同增效作用，同时适用于常规含土油包水钻井液。通过对相关处理剂的优选与加量优化，确定了高密度无黏土油基钻井液体系的配方，对其进行了基本性能评价，结果表明：体系密度在2．20～2．60g／cm3，动切力在13～17Pa，且表观黏度适中，塑性黏度不高，流变性能良好；体系在240℃高温热滚后黏度涨幅不大，高温高压滤失量在10mL左右，破乳电压大于400V，性能稳定。体系现场应用效果良好。图7表6参13
英文摘要：
Based on supramolecular chemistry, a rheology modifier CFZTQ-1 for oil base drilling fluids was developed, and an innovative high-density organoclay-free oil base drilling fluid system centering on CFZTQ-1 was designed, evaluated and applied in the field. CFZTQ-1 can strongly increase the elasticity of invert emulsion due to the supramolecular structure assembled in water phase; CFZTQ-1 has stronger effect in elevating the yield point and suspension ability than several foreign rheology modifiers; the synergistic effect with organoclay also makes CFZTQ-1 available in traditional clay-contained invert emulsion drilling fluids. Through the category and dosage optimization of related additives, the formula of the high-density organoclay-free oil base drilling fluid was established and its performance was evaluated. The organoclay-free drilling fluid owns favorable rheology with density of 2.40-2.60 g/cm3, yield point of 13-17 Pa, moderate apparent viscosity and relative low plastic viscosity; after hot rolling at 240℃, the drilling fluid still keeps a stable performance as its viscosity only increases slightly, its high temperature and high pressure （HTHP） filtration loss is about 10 mL and its electrical stability is greater than 400 V. This innovative drilling fluid system achieves excellent field application as well.
同期刊论文项目
同项目期刊论文
Study on a Ranging System Based on Dual Solenoid Assemblies, for Determining the Relative Position o
Mechanical Analyses of Casings in Boreholes, under Non-uniform Remote Crustal Stress Fields: Analyti
Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanoco
Coupled dynamic analysis of deepwater drilling riser under combined forcing and parametric excitatio
Experimental investigation on the non-planar propagation of hydraulic fracture in Fractured Shale Re
Finite element analysis of deepwater conductor bearing capacity to analyze the subsea wellhead stabi
On the collapse resistance of multilayer cemented casing in directional well under anisotropic forma
Simulation and analysis of coal seam conditions on the stress disturbance effects of pulsating hydro
On the Use of PEBI Grids in the Numerical Simulations of Two-Phase Flows in Fractured Horizontal Wel
Finite element method for simulating the effects of torque and drag on buckling of tubular inside bo
A new method for determining the minimum gas injection rate required for hole cleaning in horizontal
Static analysis of deep-water marine riser subjected to both axial and lateral forces in its install
Structure,and Properties of Poly (vinylacetate-co-methyl methacrylate) Nanocomposite Microspheres Wi
The Research on Borehole Stability in Depleted Reservoir and Caprock: Using the Geophysics Logging D
In-situ encapsulating MMT intermediate particles by suspension polymerization of poly (methyl methac
Mechanical behavior analysis for the determination of riser installation window in offshore drilling
Reactivation mechanism of natural fractures by hydraulic fracturing in naturally fractured shale res
A magnet ranging calculation method for steerable drilling in build-up sections of twin parallel hor
A new electromagnetic beacon tool for directional drilling in steam assisted gravity drainage horizo
Real-Time Prediction and Optimization of Drilling Performance Based on a New Mechanical Specific Ene
The sensibility of mechanical behavior to loading rate for shale gas reservoir with different weak p
On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Contro
期刊信息
位置：